Jeffrey Scott started building roller coaster models when he was only nine years old. And 23 years later, he’s still building them — bigger and more complex than ever.
His inspiration?
“Raptor at Cedar Point inspired me when it first came out. I was infatuated with the track design and layout of the coaster.”
Cedar Point is a frequent subject in Jeffrey’s work, as seen in the below model of the park’s Corkscrew and Power Tower:
I assumed that given the complexity of his models, computer-aided design (CAD) was an integral part of his process. But I was wrong:
“I do not use any type of CAD programming softwares! I’ve been doing this for well over 20 years, so I’ve developed a good eye. I’m able to build identical replicas based off pictures and videos.”
What materials does he use to make these stunning roller coaster models?
Jeffrey’s roller coaster models are created with plastics, wood, high-gloss paints and finishes, hot glue, bonding glue and 1/8 flex wires.
He uses LED lights to illuminate his models at night:
Above: Cedar Point and Millennium Force at night
All of his models are hand-painted with either a spray can, airbrush or hand brush.
His favorite model?
Jeffrey’s favorite model that he’s ever created was a replica of Millennium Force at Cedar Point:
“It’s a fully functional model made from Coaster Dynamix track and coaster cars mixed with Cedar Point’s Coaster Dynamix realistic trains. The structure itself was handmade and took over six months to build from start to finish and cost almost $4,500.”
His work has even been featured by roller coaster manufacturers.
Above: Thunderbolt at Luna Park
He worked closely with Zamperla president Valerio Ferrari to build a model of Thunderbolt, the Zamperla coaster that opened at New York’s Luna Park in 2014.
“I was sent over blueprints and was instructed accordingly. The process of this model from start to finish was just under three months. The model was then created and shipped to their headquarters.”
The Thunderbolt model then traveled around the world to various trade shows.
While Jeffrey’s crafted countless replicas of existing coasters, he’s also built his own prototype designs, like this Vekoma Giant Boomerang-inspired model:
These prototypes demonstrate his ability as not only a replicator and craftsman but also as a designer.
More Than Coaster Models
Jeffrey’s portfolio extends beyond roller coasters — he’s crafted incredibly detailed theme park attractions, like this river rapids water ride:
Recently, he’s dipped his toes in the world of live entertainment:
“Just within the last two years, I started building fully functional miniature entertainment venues — nightclubs, lounges, outdoor venues.”
So what coaster does he plan to recreate next? The recently announced Steel Vengeance at Cedar Point:
That’s a tall order. But given his record, I think he’s more than ready for the challenge.
What advice does Jeffrey offer amateur model makers?
He admits that giving advice for something he taught himself how to do is challenging:
“I’m self taught and have made a ton of mistakes over the years. Those mistakes got me where I am today in my model-building career.”
“Technique and accuracy is everything, which has taken me years to perfect. It will come over time.”
What advice does Jeffrey give those interested in this type of detailed model making?
“Have a sense of scale and perspective.”
Costs are another factor:
“Model building is a very expensive hobby. Do your research before you purchase materials as they can be quite expensive.”
“Be prepared to spend lots of time investigating and searching materials. It may take weeks or even a month or so before i break ground on a new project.”
Quality is key…:
“Find quality material. Supplies are found at Michaels, Hobby Lobby, Home Depot, Ebay, Amazon. The higher the quality of material that is used, the better your model will turn out.”
…as is patience:
“You must learn to be patient. It may take a few months from start to finish! For example, the Raptor took me three months.”
His last piece of advice? Never give up.
To see more of Jeffrey’s incredible work, visit his Facebook page.
Do you have any experience building model roller coasters or other attractions? Share your work in the comments section below, or share them with us on Twitter and Facebook.
All I built was a k’nex coaster model.Compared to his work,it was a piece of cake to make.
I’m about to start my first coaster model. No plans or anything. If you could help me along, I’ll create a website to teach others. I’m 60 and I still love building models. Yours are incredible. The biggest problem is math. Figuring out the equations to make it run right. Do you have any formulas? I have no idea where to begin. I have a small CNC machine, a 3D resin printer, and nearly every woodworking tool there is (and a wire welder). I am learning Fusion360 because I’ll be printing my own cars and wheels and scenery. Any assistance would be greatly appreciated. Thanks
Hi Jeffrey. That’s awesome to hear you are about to start your first model. We’ve interviewed tons of coaster modelers in the past, search the site for “model” and read through our previous interviews. Have you read Coasters 101 or Paul Greg’s Backyard Roller coasters? Both book contains some of the equations used in roller coaster design. Let me know if you have any other questions!
Does Jeff have an instagram account or a facebook? Is that his Steel Vengence model thats currently sitting in the cedar point arcade? Because thats impressive. Im a)obsessed and b)impressed.